Our Products

Quality. Reliability. Innovation.

By integrating innovation into our core products, we position ourselves to deliver superior value to our markets.


Primary Impactor | HPI

This series of primary impact crushers is used in the cement, aggregate and recycling industries.

Secondary Impactor | HSI

The HSI series has been designed for the economic secondary crushing and, depending on its configurations, processing of either soft and medium-hard or hard rocks is effected.

Tertiary Impactor | HTI

HAZEMAG HTI – the innovation for the production of crushed stone fines and high-quality stone chippings.

Compound Crusher | HPC

The Compound Crusher HPC is used as a primary crusher in the cement industry.

Hammercrushers | HDS

Double-shaft hammer crushers are mainly used in the cement industry for the comminution of soft to medium-hard.

Center Sizer | HCS

For the industrial beneficiation of primary and secondary raw materials, crushing procedures for the production of certain grain sizes, forms, surfaces or for the outcrop of multi-component materials play a central role.

Rollcrusher | HRC

For the industrial beneficiation of primary and secondary raw materials, crushing procedures for the production of certain grain sizes, forms, surfaces or for the outcrop of multi-component materials play a central role.

Horizontal Impact Crusher | HHI

The horizontal impact crusher of the HHI series mainly consists of two machine components: the impact roll and the chain conveyor.

Feeder Breaker | HFB

The HAZEMAG Feeder Breaker HFB is a complete horizontal roll crusher plant, which works according to the field-proven principle of crushing in the horizontal material flow.

Hammermill | HUM/HNM

Hammer mills of the type HUM and HNM are employed for the fine crushing and/or mill drying of medium-hard to soft materials.

Rapid Dryer | HRD

The thermal drying (water vaporisation) in the rapid dryer provides for diverse application in a wide spectrum of materials.

Apron Feeder | HAF

HAZEMAG apron feeders HAF are used for feed hopper discharging in primary crushing plants as a loading or discharging conveyor e.g. in the cement and raw material industry.

Push Feeder | HPF

HAZEMAG Push Feeders HPF are the most robust discharge units for feed hoppers.

Rollerscreen | HRS/HVW

In recent years conventional roller screens proved more and more successfully as sturdy and effective organs for the screening of fines in the feed material of crushing plants.

Flap Gates | HPV/HGV

For your requirements, you also can take advantage of HAZEMAG’s 70 years’ experience in supplying hundreds of gate valves worldwide. Each application is carefully considered on its merits to decide which type and design of valve would be most suitable.

Cement Industry

Cement is used and enjoyed in nearly all aspects of our daily lives; residential and commercial construction, roads, highways, bridges, dams, water and sewage treatment plants, airports and tunnels.

Quarry Stone Industry

Aggregates such as limestone, granite and gravel are essential to maintaining the quality of life around our world. This natural resource is used and enjoyed in nearly all aspects of our daily lives.

Drying technology

The processing of minerals entails a number of procedural steps; such as crushing, sizing, classifying, and at times the need for drying.

Rubble Recycling

The successful processing of a wide range of demolition and construction debris into an acceptable, saleable product is the target of processing. This is particularly relevant in the business of rubble processing, where crushing and screening plants are commonly employed.

Mobile Plants

HAZEMAG has developed a range of plant concepts that can readily permit the relocation of the crushing system.

Feeder Breaker | HFB

The HAZEMAG Feeder Breaker HFB is a complete horizontal roll crusher plant, which works according to the field-proven principle of crushing in the horizontal material flow.

Chain Feeder | HCF

Typical application on stockpiles and transshipment sites.

Dinting Loader | HDL 300

The dinting machines stand out for a simple as well as compact and serviceable design and high operational reliability.

Multi-functional Machine | HMF

The HMF is a crawler-mounted and electro-hydraulically driven loader which, because of its different attachments, may be used for a wide range of applications.

Side Tipping Loader | HSL

HAZEMAG MINING side tipping loaders are suited for all loading works arising in underground operation. They are characterized by a simple, compact and easy to maintain design as well as by a high operational availability.

Drilling Jumbo | HDM1

The single-boom drilling jumbo HDM 1 has been constructed for the preparation of blast hole and anchor drillings as well as for roof bolting.

Boring Loader | HBL

For gallery mine devolopment in cross sections from 12 up to 18 m2 in mining projects, HAZEMAG & EPR GmbH offers the crawler mounted boring loader HBL which is able to realize load works and drilling works for blasting also with a single machine.

Roadheading Excavator | HRE

Especially designed for the effective drifting of tunnels and galleries with small cross sections of 9 m2 to 22 m2 the HRE combines the advantages of…

Long Hole Drilling Machine | HLH

Drill rigs of the TURMAG type series HLH 50 to HLH 300 may be applied for a multitude of drilling tasks, such as core drillings, exploration and degasification drillings.

Latest Long Hole Drilling Machine | HLH 260

Drill rigs of the TURMAG type series HLH 50 to HLH 300 may be applied for a multitude of drilling tasks in coal mining, such as core drillings, exploration and degasification drillings.

Hand-Held Drilling | HTS

The pneumatically driven drilling machines of the HTS 4 series may be used for a multitude of drilling applications. The powerful rotary drill drive in combination with the sturdy design characterizes this successful series of machines.