Key Features

Avoid cross-contamination

Transfer of flowing material from one process stage to another

For processing equipment

Hammer Mills, Dryers, Klins, Bag filters

Special designs available

Central lubrication & measures to prevent material caking

FLAP GATES HPV/HGV

TECHNICAL DATA

PENDULUM FLAP GATE HPV

Type Inlet/Outlet [mm] Throughput rate [m3/h] Feed size [mm] Installed Power* [kW] Weight [kg]
HPV 33 330 x 330 5 80 0.55 200
HPV 44 390 x 410 7 100 1.1 350
HPV 55 500 x 500 13 130 1.1 400
HPV 66 560 x 597 30 150 2.2 760
HPV 610 560 x 997 50 150 2.2 870
HPV 615 560 x 1.497 75 150 2.2 1.030
HPV 810 800 x 1.000 90 300 4.4 2.300
HPV 815 800 x 1.500 150 300 4.4 2.695
HPV 1015 1.000 x 1.490 200 350 5.5 3.450
HPV 1020 1.000 x 1.990 265 350 5.5 4.410
*The weight specifications refer to 2 segments (flaps)

ROTARY GATE VALVES HGV

Type Inlet/Outlet [mm] Throughput rate [m3/h] Feed size [mm] Installed Power* [kW] Weight [kg]
HGV 45 185 x 500 40 40 1.5 463
HGV 48 185 x 800 65 40 1.5 540
HGV 410 185 x 1,000 80 40 1.5 601
HGV 56 220 x 600 75 50 2.2 651
HGV 58 220 x 800 100 50 2.2 740
HGV 510 220 x 1,000 125 50 3 850
HGV 66 290 x 600 110 60 2.2 1,018
HGV 68 290 x 800 150 60 3 1,135
HGV 610 290 x 1,000 190 60 3 1,358
HGV 86 359 x 620 200 80 3.7 1,401
HGV 88 395 x 820 265 80 3.7 1,629
HGV 810 395 x 1,020 330 80 5.5 1,825

PRODUCT DESCRIPTION

The perfect introduction to your process.

These valves are used to transfer flowing material from one process stage to another. Depending on the particular requirement, they can be used as either feed or discharge valves, or as air locks to seal off a part of the process.

HAZEMAG gate valves are highly reliable, extremely robust, and easy to maintain.

HAZEMAG has supplied hundreds of gate valves worldwide. Each individual application is carefully considered to determine the most suitable type and design of valve, and we place great emphasis on the quality of our gate valves; a feature highly valued by all our customers.

Range of Application
Feed and discharge valves for processing equipment such as dryers, kilns, electrostatic precipitators, bag filters, cyclones, classifiers, hammer mills, ball mills, vertical roller mills, etc.

Material Characteristics
Granular, fine, coarse, lumpy, etc.

Pendulum Flap Gates: up to approx. 550m3/h (depending on model)
Rotary Gate Valves: up to approx. 550m3/h (depending on model)

Examples of materials handled:

Activated Charcoal, Aluminium Hydroxide, Aluminium Grits, Aluminium Hydrate, Anhydrite, Anode Scrap, Ash, Bentonite, Blast Furnace Slag, Calcium Chloride, Cement, Chalk, Chemical Gypsum, Chrome Hydroxide Filter Cake, Chrome Ore, Clay, Clinker, Coal, Coke, Copper Cement, Copper Concentrate, Dolomite, Electrode Coke, Feldspar, Filter Cake, Flue Gas Gypsum, Fluorite, Graphite, Green Coke, Gypsum, Iron Ore, Kaolin, Limestone, Magnesite, Marl, Petroleum Coke, Phosphate Rock, Pozzuolana, Raw Meal, Raw Meal Grits, Slag Sand, Splint Coal, Trass, Titanium Dioxide.

Pendulum Flap Gates: up to approx. 500mm (depending on model)
Rotary Gate Valves: up to approx. 80mm (depending on model)
Rotary Gate Valves with Retracting Shield: single lumps up to approx. 300mm (depending on model)

  • For high temperature applications
  • Fabrication using special materials
  • Central lubrication
  • Measures to prevent material caking and to reduce wear, etc.

Mainly used as feed or discharge valves for coarse, lumpy material.

Special feature
Inlet and outlet are offset at a tangent to the rotary gate, resulting in much reduced housing wear, and practically no danger of material jamming caused by large lumps.

Mainly used as feed or discharge valves for coarse, lumpy material at high capacities and high differential pressures.

Special feature

  • Ability to handle coarse material containing lumps up to 300mm (depending on model)

SHARE ON SOCIAL MEDIA!

When you need an Industrial Solution... WE ARE HERE FOR YOU

Contact Us