A place for practical, application specific, raw material investigation. A program that helps to establish valuable information specific to your project goals, material processing needs and the potential use of HAZEMAG equipment and services. It’s all about you: The HAZEMAG Customer!

It goes without saying that you are invited to accompany the tests in our Test Plant, and this would also be a great opportunity to discuss your project in detail.

A wealth of experience is to be found behind the operation of every HAZEMAG product, backed by a level of partnership and product support that remains second to none. Our application knowledge, equipment flexibility and market competitiveness put us in a unique position to react to your precise project needs. We call it “Partnership Unlimited – The HAZEMAG Way”.

The existing plant facilities allow for equipment to be combined and operated within the following groups:

• Laboratory Testing
• Coarse Crushing / Screening
• Fine Crushing / Grinding
• Drying
• Grinding & Drying

 

To ensure that field conditions are replicated as close as possible, machines at the Test Plant are all from the current HAZEMAG range of equipment.

The layout of the Coarse Crushing section has been designed to use one of the two Impactors, or the Roll Crusher. If a screening unit is used, oversize material can be returned to the feed material flow (closed loop operation).

The Fine Crushing and Drying section, with a Hammermill and Rapid Dryer, forms another core part of the test plant.

The Hammermill has been integrated into the system in such a way that a range of crushing/grinding & drying operations are possible.

In the section set aside solely for Drying Technology and the Processing of Wet Feed Materials, is a Rapid Dryer with HAZEMAG rotary gate valves for feeding and discharge; fine material is separated via cyclone and filter.

The whole plant is computer-controlled, and there is a visual display of the current operational status of all units. A total of six basic menus are available, which can be modified as needed.

During the test process, the status of the individual equipment, such as the power input of the electric drives, the rotor tip speed of the crushers, as well as the various system temperatures, are all displayed. Pre-programming of various parameters is also possible.