Materials recovery with recycling plants

Reciclaje moderno para un futuro mejor.

La propia base de HAZEMAG empezó con el reciclado, al desarrollar en 1946 el Andreas Impactor, la primera trituradora de impacto de su clase, diseñada para procesar las enormes cantidades de escombros que era necesario despejar en Alemania. In this way, we try to have a positive impact against the waste of materials such as plastic.

Hoy en día, el equipo de reciclado es una parte importante de los valores tradicionales y globales de HAZEMAG, y está dedicado a recuperar la utilidad de valiosos recursos previamente utilizados, beneficiando con ello al planeta y a todos sus habitantes.

Con su profundo conocimiento de los procesos, sus innovadoras máquinas de alta calidad y sus diseños de plantas, HAZEMAG sigue siendo líder global en la provisión de eficaces soluciones personalizadas y comprobadas para la trituración y el reciclado de materiales tales como escombros, hormigón, asfalto, vidrio y mucho más.

Nuestro centro de ensayos está equipado para realizar ensayos a los productos de nuestros clientes, ofreciendo así la solución de mayor calidad en todo momento.


Perhaps more than many other industries, the success of the recycling group is highly determined by the control and management of the raw to ensure high-quality recycling plants and reduce the waste of materials. To achieve this, the processing system must offer a very high level of flexibility, extreme ruggedness, high technology and the ability to adapt to an extensive variation range in the raw materials. The decision between a fixed/stationary recycling plant versus a mobile recycling plant are solely determined by the availability of raw materials, annual projected production rates and the local demand for the recycled products. Under the correct management controls, the success and profitability of a recycling facility can easily be realized.

Quality control, raw material management and the needed processing methods are realized in a variety of ways, such as;

  • selective demolition of buildings
  • inspection/monitoring of the incoming material
  • raw material stockpiling according to its makeup/ mixture
  • material preparation: pre-sizing, sorting and removal of larger tramp irons
  • raw material identification, classifying and selective sorting
  • metal identification, preparation and possible removal
  • sorting out of non-mineral fractions
  • separation of light materials

In recycling plants, the design of the recycling plant will be defined by the makeup and characteristics of feed material. The flexibility and components that make up the plant must be capable of processing a raw feed material that can range from clean building rubble, mixed building rubble and large concrete products; all of which can potentially contain large amounts of tramp irons.

The requirements on the finished product; defined as the grain size and needed distribution of each, product shape requirements, material composition and perhaps most important its quality in regard to purity, clean materials, will define and reflect the plants level of technology and automation.

The successful processing of a wide range of demolition and construction debris into an acceptable, saleable product is the target of processing with recycling plants. This is particularly relevant in the business of rubble processing, where crushing and screening plants are commonly employed. In our material recovery facilities, we are working on optimized equipment to reduce the waste of materials such as minerals, metals and more.

For the processing of building rubble, the availability of proven machines and technology is certainly known. Although the overall design and selection of the ancillary machines can vary, the heart and key component of any recycling plant is found in its crus­hing unit, which without any doubt will help determine the success and profitability for any operation. Therefore, we can reduce the waste of usable materials.


  • Todo
  • Impactores
  • Alimentador
  • Automatización
  • Prueba de Materiales
  • Trituradora Horizontal

Global Testing & Research Center

Material testing and application advice.


Visualize the performance of your HAZEMAG equipment and plant – worldwide, at any time.

Alimentador de cadena | HCF

Typical application on stockpiles and transshipment sites.

Alimentador de Placas | HAF

HAZEMAG apron feeders HAF are used for feed hopper discharging in primary crushing plants as a loading or discharging conveyor e.g. in the cement and raw material industry.

Trituradora de Impacto horizontal | HHI

The horizontal impact crusher of the HHI series mainly consists of two machine components: the impact roll and the chain conveyor.

Impactor terciario | HTI

HAZEMAG HTI – la innovación para la producción de finos de piedra triturada y esquirlas de piedra de alta calidad.

Primary Impactor | HPI-H

This series of primary impact crushers is used in the cement, aggregate and recycling industries.

Impactor secundario | HSI

The HSI series has been designed for the economic secondary crushing and, depending on its configurations, processing of either soft and medium-hard or hard rocks is effected.

Impactor primario | HPI

Esta serie de trituradoras primarias de impacto se utiliza en las industrias de cemento, granulados y reciclado.

When you need an Industrial Solution... WE ARE HERE FOR YOU

Contact Us