Produtos

Mostrar produtos

  • All
  • Moinho de Martelo
  • Britador Horizontal
  • Britador de Rolos
  • Peneira
  • Britador de Impacto
  • Britador de Martelo
  • Sizer
  • Automação
  • Secador
  • Alimentador
  • Material de teste

Material testing and application advice.

Visualize the performance of your HAZEMAG equipment and plant – worldwide, at any time.

This series of primary impact crushers is used in the cement, aggregate and recycling industries.

The HSI series has been designed for the economic secondary crushing and, depending on its configurations, processing of either soft and medium-hard or hard rocks is effected.

This series of primary impact crushers is used in the cement, aggregate and recycling industries.

HAZEMAG HTI – the innovation for the production of crushed stone fines and high-quality stone chippings.

Double-shaft hammer crushers are mainly used in the cement industry for the comminution of soft to medium-hard.

For the industrial beneficiation of primary and secondary raw materials, crushing procedures for the production of certain grain sizes, forms, surfaces or for the outcrop of multi-component materials play a central role.

For the industrial beneficiation of primary and secondary raw materials, crushing procedures for the production of certain grain sizes, forms, surfaces or for the outcrop of multi-component materials play a central role.

The horizontal impact crusher of the HHI series mainly consists of two machine components: the impact roll and the chain conveyor.

The HAZEMAG Feeder Breaker HFB is a complete horizontal roll crusher plant, which works according to the field-proven principle of crushing in the horizontal material flow.

Hammer mills of the type HUM and HNM are employed for the fine crushing and/or mill drying of medium-hard to soft materials.

Hammer mills of the type HUV are are mainly used in the sectors of raw materials and the iron and steel industries for secondary and tertiary crushing of various materials.

The thermal drying (water vaporisation) in the rapid dryer provides for diverse application in a wide spectrum of materials.

HAZEMAG Push Feeders HPF are the most robust discharge units for feed hoppers.

In recent years conventional roller screens proved more and more successfully as sturdy and effective organs for the screening of fines in the feed material of crushing plants.

For your requirements, you also can take advantage of HAZEMAG’s 70 years’ experience in supplying hundreds of gate valves worldwide. Each application is carefully considered on its merits to decide which type and design of valve would be most suitable.

Typical application on stockpiles and transshipment sites.

HAZEMAG apron feeders HAF are used for feed hopper discharging in primary crushing plants as a loading or discharging conveyor e.g. in the cement and raw material industry.

Smooth compression crushing with a low percentage of fines. Used for crushing of cohesive materials with a high moisture content.

The side sizer is characterised by two crushing zones and continous generation of pressure between crushing rolls & side walls.

The Hammer Mill HNM is typically employed for fine grinding. The two non-reversible rotors achieve a high capacity with a minimal machine width.

With high reduction ratios, the HAZEMAG’s HPC Compound Crushers are used for Primary Crushing duties in the Cement Industry – producing feed material for further processing in a ball mill.

PROCESSAMENTO DE MINERAIS
CIMENTO E AGREGADOS
RECICLAGEM
MINERAÇÃO SUBTERRÂNEA
serviços

When you need an Industrial Solution... WE ARE HERE FOR YOU

Contact Us
WE ARE ONE
© 2022 HAZEMAG
Imprint | Data Privacy Statement | General Conditions of Supply | General Terms and Conditions of Purchase | General Conditions of Service Visits