HAMMER MILL HNM
HAMMER MILL HNM
|Model||Rotor Diameter x Width mm||Capacity* for 95% <3mm t/h||Power Requirements* kW||Weight kg|
|HNM 0703||650 x 250||10||2 x 15 - 45||1.900|
|HNM 0705||650 x 500||20||2 x 18,5 - 55||2.500|
|HNM 0708||650 x 750||30||2 x 22 - 75||3.100|
|HNM 1008||1.000 x 750||45||2 x 30 - 160||7.100|
|HNM 1013||1.000 x 1.250||70||2 x 45 - 200||10.000|
|HNM 1020||1.000 x 2.000||110||2 x 55 - 250||18.800|
|HNM 1313||1.300 x 1.250||120||2 x 55 - 250||21.000|
|HNM 1325||1.300 x 2.500||190||2 x 90 - 400||39.000|
|* values are variable and can be aligned to the particular requirements|
HAZEMAG’s Hammer Mills HNM are used for fine crushing or mill drying of medium-hard to soft materials such as: Anhydrite, quicklime, lignite, dolomite, electronic scrap, gypsum, glass, potash, limestone, diatomite, chalk, phosphates, salts and clay.
Hinged sections of the housing are opened hydraulically, and the interior is lined with replaceable abrasion wear plates. Built-in components, such as impact bars, spacer bars (grinding path) and various grates are easily replaceable, and can be employed in various ways to achieve the targeted granular size.
The HAZEMAG HNM Hammermill is equipped with two non-reversible rotors
The disc rotor is equipped with freely swinging hammers
In the mill-drying process, the material is not only crushed, but also dried at the same time. Process gas is passed through the mill in direct flow with the material being crushed. The dried material is generally discharged from the Hammermill via grates, and subsequently via a discharge screw conveyor with rotary valve – which also serves as an air seal.